久久乂 x-久久影国产-久久影视中文字幕-久久娱乐中文网-久久欲-久久爰XXXⅩ高潮喷水

The appearance of woodworking milling machine, to a large extent, improves the processing efficiency of workers. Different clamps adapt to different processing needs. Our incorrect operation in the use process will cause mechanical failure. So what should we pay attention to in the use process?
1、 The milling machine should always be stored in a dark and humid place.

2、 In order to protect the sliding parts of the milling machine, the chip on the surface of the machine tool should be removed frequently, and the lubricating oil should be added to the sliding parts of the milling machine before and after the work.
3、 The milling machine should replenish the cooling liquid in the cooling box regularly. The coolant in the tank shall be kept at a height of 2 / 3-1 / 4 under working condition. The spray coolant will accumulate sediment during storage and use. The coolant and cleaning the cooling box should be replaced timely according to the actual situation. If the blockage is found, the pipeline should be cleaned and the coolant can be configured with emulsifier.
The above is about the use of woodworking milling machine points, I hope you understand, to help you better use machinery.

• Prev：What are the common faults of belt sander
• Next：What are the safety measures we should take when using woodw